Spray drone MG-1P flying drone aerial spraying pesticides latest agricultural drone crop pesticide sprayer

FOB Reference Price:Get Latest Price
$8,500.00 - $10,000.00 / Pieces | 1 Piece/Pieces (Min. Order)
Model Number:
Lead Time:
Quantity(Pieces) 1 - 1 >1
Est. Time(days) 7 Negotiable
Report Suspicious Activity
Quick Details
Year Built:
Place of Origin:
Guangdong, China (Mainland)
mg-1p Power:
mg1p Plastic Type:
airraft sprinkler Spurt:
Power Battery Agricultural drone:
NOZZLE Quantity Spray drone:
mg-1p Takeoff Weight:
24.8 kg (at sea level)
Drone Standard Operating Payload:
10 L / 10 Kg
Agricultural UAV Hovering Time:
20 mins
spray UAV flying time:
about 30 mins
Farm, hill, terraced crop spraying
Supply Ability
Supply Ability:
500 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
Natural Packing
Shenzhen or Guangzhou, China
Lead Time :
Quantity(Pieces) 1 - 1 >1
Est. Time(days) 7 To be negotiated
Video Description
 MG-1P RTK  Hot Sale Drone Sprayer For Agriculture

The agricultural sprinkler drone  MG-1P RTK  is used for farm farming irrigation. The use of drone sprayers in agriculture has resulted in cost savings for traditional farming. It can remotely control multiple agricultural drones to operate at the same time, better improve and save farmers' work efficiency and cost savings, and release work pressure. The MG-1P spray irrigation rate is even 100 times faster than manual spray operation. Not only can you help improve farm efficiency, it can also help you save money and time.

It must be the best drone in agriculture!

Total Weight (without battery)9.7 kg
Standard Takeoff Weight23.8 kg (MG-1P) 23.9 kg (MG-1P RTK)
Takeoff Weight24.8 kg (at sea level)
Thrust-to-Weight1.71 (with 23.8 kg takeoff weight)
Power BatteryDesignated DJI Battery (MG-12000P)
Power Consumption6400 W
Hovering Power3800 W (with 23.7 kg takeoff weight)
Hovering Time20min (@12000 mAh & 13.7 kg takeoff weight)
9 min (@12000 mAh & 23.7 kg takeoff weight)
Positioning SystemGPS+GLONASS (global) or GPS+Beidou (Asia-Pacific)
Frequency PointGPS L1&L2, GLONASS F1&F2
Asia-PacificGPS L1&L2, Beidou B1&B2
Positioning AccuracyFlat Surface: 1 cm + 1 ppm
Height2 cm + 1 ppm
Orientation Accuracy(0.2/R) °R is the distance between two antennas and the unit is meter.
Velocity Measurement?0.03 m/s
Battery ModelMG-12000PAllowable Current (Continuous)25 A
Voltage44.4 VOperating Voltage12S LiPo
Discharge Rate20 ℃Signal Frequency30 to 450 Hz
Protection RatingIP54Drive PWM Frequency12 kHz
Capacity12,000 mAh  
Volume10 LModelXR11001VS (0.379L/min)
Standard Operating Payload10 kgQuantity4
Battery Size151mm x 195mm x 70mmSpray Speed0.43 L/min (per nozzle, for water)
  Spray Width4 - 6 m (4 nozzles, 1.5 – 3 m above the crops)
  Droplet Size*XR11001: 130~250 μm
*Droplet size may vary according to operation environment and spraying speed.
  Recommend ModelTX-VK8 (0.525L/min)


Innovative Insights. Increased Efficiency.
One control multi-machine
Double the work efficiency, double the remote control distance
The MG-1P supports one control and multiple machines. One remote control can coordinate up to five MG-1P series plant protection machines to work at the same time, and the efficiency of single operation is doubled.
The new generation of intelligent remote control has a control range of up to 3,000 meters [1], which supports the same distance HD image transmission and ensures safe operation. A new generation of smart remote control
With the addition of 4G communication function, the battery and antenna are replaceable, making daily work more convenient.
FPV camera
Work safety, as you can see
MG1P plant protection uav?with the high-definition fpv camera, the plant protection machine can realize the flight management. The flying hand can easily set the A/B point or waypoint through the real-life image returned by the FPV, eliminating the labor required in the past.

Walking or A/B point workman, the job planning is more time-saving and efficient.

Flight performance
Stable and reliable
The MG-1P series plant protection machine features an eight-axis power redundancy design with adaptive power protection algorithms and robust control algorithms to maintain safe flight even if one of the axes fails during flight. The motor drive system supports dual backup communication mechanism, and automatically switches to the backup link when the signal link is abnormal, ensuring flight safety.
Second generation high precision radar
All-weather escort is safer
The second generation of high-precision radar combines the previous generation of three directional radars with an obstacle-avoidance radar, doubling the sensitivity, supporting omnidirectional detection, and greatly improving obstacle perception and ground-flight capabilities.
The MG-1P can sense the cross-pull wire with a radius of 0.5 cm at the front 15 meters, which can effectively reduce the safety risks caused by common obstacles such as wires and tree poles during daily operation. Active sensing and obstacle avoidance can work around the clock.
Not affected by light and dust. The multi-point omnidirectional detection technology can sense the slope and flatness of the terrain, and adjust the flight height in time to meet the requirements of the imitation operation. While the performance is improved, the radar protection performance is also improved to IP67.
Fully adapt to the complex environment of the field.
MG-1P RTK Edition
Precise positioning without fear of interference
MG-1P RTK version adopts D-RTK high-precision navigation and positioning technology, the positioning accuracy is up to centimeter level, the route trajectory can be accurately and repeatedly called; the dual antenna direction finding technology has strong anti-magnetic interference capability, and the MG-1P RTK is guaranteed near the high-voltage line. Stable flight in complex environments.
The MG-1P RTK version is required for use with next-generation base stations and handheld plotters. The handheld plotter can accurately measure farmland by receiving RTK differential data and transmit the measured data to the remote control app for precise planning.
MG APP 2.0 has a new multi-machine cooperative operation mode, and the multi-machine operation is simple and convenient, and the MG-1P series plant protection machine “one control and multiple machines” is fully utilized. In addition, MG APP 2.0 has added a coordinated turn mode.
By optimizing the route flight algorithm, the efficiency is increased by 20% and the operation is more efficient. At the same time, manual, enhanced manual and AB point operating modes are available to provide a complete solution for different operating environments.
Packing & Delivery
Our Company

Our Company

Founded in 2013, Rdroneguy is well known as a
comprehensive DRONE manufacturer at producing
research, manufacturing and sales service. And since2014, we start to make the research for the Thermal technology with drone together, to make the solution ofOil pipeline inspection, Heating pipe inspection,Substation inspection, Large equipment maintenance,Fire protection applications, and the Search Rescue.

Our Products

Our products are widely used in various fields, such as entertainment, TV photography, agricultural, geography mapping, public safety etc. Rdroneguy technology have professional team, sticking to the spirit of innovation,efficiency, dedication and endeavor, to supply good products , good solution and good service on the drone.


Our Service
We supply one stop drone solutions and re-equip, to Satisfy the need of Industrial
Agriculture Security and Rescue ect.. Professional field
Timely Response
We will reply any of your inquiries within 24 hours,even if on holidays.
Strict Quality Control
Our Q&C team will inspect every shipment before delivery and provide official inspection report.
After Sales Service
Our customer service team will receive all the feedback from our customers and improve our service. we will give our responsible solution as soon as possible. Customers' satisfaction is our eternal pursuit.
Q: Why choose us
A: We have 4 years' experience on drone business and one stop solutions of drone, especially on security.
Q: What is the Minimum Order Quantity (MOQ)?
A: No quantity limited, Sample order or small order is acceptable, but the customers have to pay the sample cost and the courier cost.
Q: How long is your delivery time?
A: Generally 5-10 days if goods are in stock. If not in stock, we need possible 3 working days to prepare goods.
Q: How will you deliver my goods to me?
A: Normally, we will ship the goods by air, by sea and by express.
Q: Can you print my own logo on the products?
A: Yes, of course. Not only the logo, but also the packing design and other OEM services are available.
Q: What is your product quality?
A: Our raw materials are all purchased from qualified suppliers. And we have very strict QC standard to assure our final products meet your requirements.
Q. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: What is your warranty?
A: Our warranty is 12 months after you received the goods. We will pay high attention to after-sales service.
Q: What method do you support to make payment?
A: We support many ways, including Western Union, MomenyGram or TT.
Q: Are you a manufacturer?
A: Yes, we are a manufacturer, both OEM and ODM. We have our own development team, sales team, and factory
You May Like
Not exactly what you want? 1 request, multiple quotations Get Quotations Now >>
You May Like